Petroleum SAE 100 R1 Wire Braided Rubber Hydraulic Hose/Pipe – Petroleum hose suppliers
Read More      Contact Us:wqpsalehose@gmail.com

Petroleum SAE 100 R1 Wire Braided Rubber Hydraulic Hose/Pipe

Petroleum SAE 100 R1 Wire Braided Rubber Hydraulic Hose/Pipe

One: Clip cloth oil hose:
Features: The hose has the advantages of small outer diameter tolerance, excellent oil resistance, heat resistance, and soft tube.
Uses: The minimum burst pressure of the hose is four times the working pressure. It is used for the diesel engine to transport gasoline, kerosene, diesel oil and other mineral oils, and it can deliver oil below 100°C. The ambient temperature of the hose is not lower than -30°C.
II. Fiber braided high-pressure oil hose:
Uses: Suitable for handling machinery, machine tools, forming machinery, mining machinery, forging machinery and other hydraulic transmission systems.
Features: The hose has a light, soft, high pressure bearing capacity and good bending performance. The burst pressure of the hose is not less than three times the working pressure.
III. Guided electrostatic oil hose (fuel dispenser hose):
1, hose use
It is suitable for conveying gasoline, kerosene, diesel oil, lubricating oil and other mineral oils at room temperature. It is especially suitable for the matching of refuelling machines.
2, performance characteristics
(1) The rubber hose is made of special rubber with good oil resistance and weather resistance. The frame material is made of high-strength copper-plated steel wire. The hose is produced with special structural design and special equipment. It has the characteristics of high pressure bearing and small volume deformation and is used. Safe and reliable.
(2) The appearance of the hose is a black cloth pattern. The temperature-temperature type wire braided oil hose is yellow, and the low-temperature wire braided rubber hose is green.
3: The steel pipe weaving tanker produced by our factory has the following salient features:
(1) The tube body is soft and lightweight, and the nylon water cloth method is used to produce the tube body with good integrity, and the outer rubber has excellent aging resistance.
(2) The volume change rate is smaller than that of conventional products, and the accuracy of measuring the oil volume is higher.
(3) Excellent electrical conductivity, no non-conductivity, and prevention of fire due to non-conductivity.
(4) The safety factor is high and the burst pressure is more than 15 times the working pressure. The use is very safe.
(5), the appearance of the hose is placed in a permanent, clear font identification band, the user can know the basic situation of the hose at a glance.

specification:

系列 内径(in.) 内径(mm) 工作压力 真空度 弯曲半径 重量
LT1210-075 3/4 19 150 30 3 0.61
LT1210-100 1 25 150 30 4 0.77
LT1210-125 11/4 32 150 30 5 0.91
LT1210-150 11/2 38 150 30 6 1.06
LT1210-200 2 51 150 30 8 1.35
LT1210-300 3 76 150 27 12 2.53
LT1210-400 4 102 150 27 16 3.51
LT1210-800 8 203 150 21 32 11.71